Let’s take the kitchen automatic fire extinguisher system for example. As you may know, most of the kitchen fires are caused when the chef is not around the kitchen stoves. When the cook leaves the kitchen for a while, the cooking equipment is in an unsupervised state, and once the cooking time is too long, or if the oil pot is lit by fire, it will cause the pan to catch fire in an instant. In addition, it is unattended, so the fire will spread in an instant, and it is difficult to contain. So for kitchen stoves, it is possible to avoid a terrible fire if you can warn of the fire in advance.
After the automatic fire extinguisher system is installed, the temperature automatic fuse device set on the stove will automatically disconnect, and the automatic fire extinguishing system of the kitchen will start immediately. At this time, the system will also issue an acousto-optic alarm sound, reminding the surrounding people to deal with it as soon as possible. In order to avoid unnecessary damage to the kitchen stove, the automatic fire extinguishing system will not be sprayed with fire extinguishing agent, and the system will set aside 30 seconds for the scene to deal with the fire. If no one is on duty, the fire will be sprayed out immediately. At the same time, high-pressure nitrogen pushes the cylinder pull rod to pull the gas shutoff valve to cut off the gas and turn on the alarm through the fretting switch, and alarm at the same time.
When there is a fire in the kitchen, there must be a corresponding containment plan. The kitchen automatic fire extinguishing system is an effective means to turn the tide when a fire occurs. The fire extinguishing agent sprinkler installed on the stove smoke cover will spray the fire at the right time, pressing the flame, and then eliminating it. Therefore, the effect of the automatic fire extinguishing system is fast and accurate. When the kitchen automatic fire extinguishing system begins to spray extinguishing agent to put out the fire, the main engine will release the open valve signal to the solenoid valve. The solenoid valve will also pop up the sharp steel needle to break the cover of the nitrogen bottle, flush the nitrogen into the fire extinguishing agent bottle group, send the fire extinguishing agent to each extinguishing agent sprinkler under the action of pressure, and then cover the fire extinguishing. The control valve impinges the diaphragm of the high pressure gas storage bottle and releases the high pressure nitrogen through the pressure reducer to pressure the fire extinguishing agent storage container, so that the extinguishing agent is sprayed into the oil pan and smoke cover through the atomizing nozzle, and the chemical reaction occurs with the burning oil to form a covering layer, isolate the air, extinguish the flame and make it non-flammable. It can be said that for this kind of accurate automatic fire extinguishing system, the advantage of efficient fire extinguishing is what other fire extinguishing sets do not have.